1. The glue is not good. Paper scraps enter the glue box and penetrate into the glue, causing the glue to thicken locally. The glue on the rubber wheel is uneven, which will cause too much or too little glue and empty glue. In addition, the paper scraps and glue seeping together will greatly reduce the quality of the collagen. Stickiness, elasticity and toughness may cause the glue-bound products to fall off or fall apart;

2. The plastic box is smoking. After the paper scraps enter the plastic box and seep together with the glue, it will cause uneven temperature transmission from the bottom to the top of the plastic box. The editor of the glue binding machine said that after heating, the glue is more likely to turn yellow, age, and agglomerate, and it must be heated repeatedly. More obvious smoke will be produced later;

3. The key board is malfunctioning. Unprocessed paper scraps will fly back and forth into adjacent functional parts as the car moves back and forth, affecting key contact, causing the key board to malfunction. In severe cases, it may also cause program errors due to electrostatic interference;

4. Environmental pollution. The machine work surface is littered with paper scraps and the LCD screen is blurry and other hygienic issues.

However, during daily use, customers tend to neglect dumping of paper scrap bags due to busy business. The editor of Mingyue Binding Machinery said that this may occur because the replacement operator fails to correctly communicate the use and maintenance requirements, resulting in forgetting to clean the paper scrap bags. The paper scraps are not discharged smoothly, and in more serious cases, the paper scraps cannot be discharged.

The phenomenon of spraying the glue box upside down causes the fully automatic wireless perfect binding machine to be unable to bind a qualified and beautiful book normally!

Therefore, in daily use of the fully automatic wireless perfect binding machine, attention should be paid to cleaning up the paper scraps in the glue box.